浙江大学机械工程学系导师：吴进明 正文

　　姓名：吴进明
　　性别：男
　　所在学院：材料科学与工程学系
　　职称：教授

　　个人简介
　　吴进明，男，教授。1999年3月博士毕业后留校任教至今。2002年12月晋升副教授，2010年12月晋升教授。期间于2000年7月至2002年7月赴日本冈山大学从事博士后研究，2005年3月至9月在香港大学以Research Associate身份进行生物材料方面合作研究，2006年7月至2007年6月获德国洪堡奖学金，在马普学会胶体与界面研究所（波茨坦）从事有序介孔薄膜研究。
　　迄今在国内外专业期刊发表论文80余篇，其中被SCI收录的论文70余篇，论文SCI引用860余次( http://www．researcherid．com/rid/B-4124-2009)。
　　负责或参加多项国家自然科学基金及省自然科学基金项目。

　　研究方向：光催化污水处理、生物材料、金属基复合材料。

　　发表论文：
　　1．Tang, M．Z．, Wu, J．M．* (2009): Photoelectrocatalytic Efficiency of Low-Temperature Precipitated Monolayer Rutile TiO2 Nanoflower Film, Science of Advanced Materials 1, 144-52．
　　2．Wu, J．M．*, Xue, H．(2009): Photocatalytic Active Titania Nanowire Arrays on Ti Substrates, Journal of the American Ceramic Society 92, 2139-43．
　　3．Song, X．M．, Wu, J．M．*, Zhang, G．J．, Yan, M．(2009): A Dual-Layer Titania Film with Enhanced Photocatalytic Activity, The Journal of Physical Chemistry C 113, 10681-88．
　　4．Song, X．M．, Wu, J．M．*, Yan, M．(2009): Photocatalytic Degradation of Selected Dyes by Titania Thin Films with Various Nanostructures, Thin Solid Films 517, 4341-47．
　　5．Song, X．M．, Wu, J．M．*, Tang, M．Z．, Qi, B．, Yan, M．(2008): Enhanced Photoelectrochemical Response of a Composite Titania Thin Film with Single-Crystalline Rutile Nanorods Embedded in Anatase Aggregates, The Journal of Physical Chemistry C 112, 19484-92．
　　6．Wu, J．M．*, Qi, B．(2008): Low-temperature Growth of Rutile Nanorod Thin Films and Their Photon-induced Property, Journal of the American Ceramic Society 91, 3961-70．
　　7．Song, X．M．, Wu, J．M．*, Yan, M．(2008): Photocatalytic and photoelectrocatalytic degradation of aqueous Rhodamine B by low-temperature deposited anatase thin films, Materials Chemistry and Physics 112, 510-515．
　　8．Wu, J．M．, Antonietti, M．, Gross, S．, Bauer, M．, Smarsly, B．(2007): Ordered mesoporous thin films of rutile TiO2 nanocrystals mixed with amorphous Ta2O5．ChemPhysChem 9, 748-57．
　　9．Ying, H．G．, Yan, M．, Ma, T．Y．, Wu, J．M．, Yu, L．Q．(2007): Effects of NH4F on the deposition rate and buffering capability of electroless Ni-P plating solution, Surface & Coatings Technology 202, 217-21．
　　10．Hu, J．, Yan, M．, Luo, W．, Wu, J．M．(2007): Effects of microstructure on the temperature dependence of relative initial permeability of NiCuZn ferrites, Physica B: Condensed Matter 400, 119-23．
　　11．Yu, L．Q．, Yan, M．, Wu, J．M．, Luo, W．, Cui, X．G．, Ying, H．G．(2007): On the cooling rate of strip cast ingots for sintered NdFeB magnets, Physica B: Condensed Matter 393, 1-5．
　　12．Wu, J．M．* (2007): Photodegradation of rhodamine B in water assisted by titania nanorod thin films subjected to various thermal treatments．Environmental Science & Technology 41, 1723-28．
　　13．Wu, J．M．*, Qi, B．(2007): Low-temperature growth of nitrogen-doped titania nanoflower film and its ability to assist photodegradation of rhodamine B in water．The Journal of Physical Chemistry C 111, 666-673．
　　14．Wu, J．M．*, Qi, B．(2007): Low-temperature growth of monolayer rutile TiO2 nanorod films．Journal of the American Ceramic Society 90, 657-60．
　　15．Wu, J．M．*, Huang B．(2007): Enhanced ability of nanostructured titania film to assist photodegradation of rhodamine B in water through natural ageing．Journal of the American Ceramic Society 90, 283-286．
　　16．Liu, S．G．, Wu, J．M．*, Zhang, S．C．, Rong, S．J．, Li, Z．Z．(2007): High temperature erosion properties of arc-spraying coatings using various cored lines．Wear 262, 555-61．
　　17．Wu, J．M．, Liu, J．F．, Satoshi, H．, Tsuru, K．and Osaka, A．(2007): Low-temperature deposition of rutile film on biomaterials substrates and its ability to induce apatite deposition in vitro．Journal of Materials Science: Materials in Medicine 18, 1529-36．
　　18．Wu, J．M．*, Huang B．, Wang, M．and Osaka A．(2006): Titania nanoflowers with high photocatalytic activity．Journal of the American Ceramic Society 89, 2660-63．
　　19．Wu, J．M．*, Zhang, S．C．, Li, Y．W．, Wang, M．, and Osaka A．(2006): Influence of film thickness on in vitro bioactivity of thin anatase films produced through direct deposition from an aqueous titanium tetrafluoride solution．Surface & Coatings Technology 201, 3181-88．
　　20．Wu, J．M．*, Wang, M．, Satoshi, H．, Tsuru, K．and Osaka A．(2006): Crystallization of amorphous titania gel by hot water aging and induction of in vitro apatite formation by crystallized Titania．Surface & Coatings Technology 201, 755-761．
　　21．Zhao, J．M．, Liu, J．F．, Wu, J．M．, Tsuru, K．, Hayakawa, S．and Osaka, A．(2006): Apatite formation on rutile and anatase layers derived by hydrolysis of titanylsulfate in a simulated body fluid,” Journal of Ceramic Society of Japan 114, 253-258．
　　22．Wu, J．M．*, Huang B．, Zeng Y．H．(2006): Low-temperature deposition of anatase thin films on titanium substrates and their abilities to photodegrade Rhodamine B in water．Thin Solid Films 497, 292-298．
　　23．Wu, J．M．*, Zhang, T．W．, Zeng, Y．W．, Satoshi, H．, Tsuru, K．and Osaka, A．(2005): Large-scale preparation of ordered titania nanorods with enhanced photocatalytic activity．Langmuir 21, 6995-7002．
　　24．Wu, J．M．, Satoshi, H．, Tsuru, K．and Osaka, A．(2004): Low-temperature preparation of anatase and rutile layers on titanium substrates and their ability to induce in vitro apatite deposition．Journal of the American Ceramic Society 87, 1635-1642．
　　25．Wu, J．M．* (2004): Low-temperature preparation of titania nanorods through direct oxidation of titanium with hydrogen peroxide．Journal of Crystal Growth 269, 347-355．
　　26．Wu, J．M．* and Zhang, T．W．(2004): Photodegradation of Rhodamine B in water assisted by titania films prepared through a novel procedure．Journal of Photochemistry and Photobiology．A: Chemistry 162, 171-177．
　　27．Wu, J．M．, Xiao, F．, Satoshi, H．, Tsuru, K．Takemoto, S．and Osaka, A．(2003): Bioactivity of metallic biomaterials with anatase layers deposited in acidic titanium tetrafluoride solution．Journal of Materials Science: Materials in Medicine 14, 1027-1032．
　　28．Wu, J．M．, Satoshi, H．, Tsuru, K．and Osaka, A．(2003): Early apatite deposition on titanium treated with hydrogen peroxide, Journal of Australia Ceramic Society 39, 36-42．
　　29．Wu, J．M．, Satoshi, H．, Tsuru, K．and Osaka, A．(2002): Nanocrystalline titania made from interactions of titanium with hydrogen peroxide solutions containing tantalum chloride．Crystal Growth & Design 2, 147-149．
　　30．Wu, J．M．, Satoshi, H．, Tsuru, K．and Osaka, A．(2002): Soft solution approach to prepare crystalline titania films．Scripta Materialia 46, 705-709．
　　31．Wu, J．M．, Satoshi, H．, Tsuru, K．and Osaka, A．(2002): Porous titania films prepared from interactions of titanium with hydrogen peroxide solution．Scripta Materialia 46, 101-106．
　　32．Wu, J．M．, Satoshi, H．, Tsuru, K．and Osaka, A．(2002): In vitro bioactivity of anatase film obtained by direct deposition from aqueous titanium tetrafluoride solutions．Thin Solid Films 414, 275-280．
　　33．Wu, J．M．, Satoshi, H．, Tsuru, K．and Osaka, A．(2002): Crystallization of anatase from amorphous titania in hot water and in vitro biomineralization．Journal of Ceramic Society of Japan 110, 78-80．
　　34．Wu, J．M．* (2001): Nano-sized amorphous alumina particles obtained by ball milling ZnO and Al powder mixture．Materials Letters 48, 324-330．
　　35．Wu, J．M．*, Zheng, S．L．, Zeng, Y．W．and Li, Z．Z．(2001): Dry sliding wear of MA/PM Al-10Ti．Transactions of Nonferrous Metals Society of China 11, 270-274．
　　36．Wu, J．M．*, Zheng, S．L．and Li, Z．Z．(2000): Thermal stability and its effects on mechanical properties of rapidly solidified Al-Ti alloys．Materials Science and Engineering A 289, 246-254．
　　37．Wu, J．M．* and Li, Z．Z．(2000): Nanostructured composite obtained by mechanically driven reduction reaction of CuO and Al powder mixture．Journal of Alloys and Compounds 299, 9-16．
　　38．Wu, J．M．* and Li, Z．Z．(2000): Contributions of the particulate reinforcement to dry sliding wear resistance of rapidly solidified Al-Ti alloys．Wear 244, 147-153．
　　39．Wu, J．M．*, Zheng, S．L．, Yuan, J．, Li, Z．Z．, Zeng, Y．W．and Ji, Z．G．(2000): Mechanical properties of rapidly solidified Al-Ti alloys after thermal exposure．Transactions of Nonferrous Metals Society of China 10, 435-440．
　　40．Wu, J．M．*, Zheng, S．L．, Li, Z．Z．and Wu, N．Q．(1999): Reduction reaction of Al-CuO powder mixture driven by mechanical alloying．Transactions of Nonferrous Metals Society of China 9, 717-722．
　　41．Wu, J．M．*, Zheng, S．L．, Li, Z．Z．and Zeng, Y．W．(1999): Effects of cold deformation on the low speed sliding wear of the RS/PM Al-10Ti alloy against carbon steel．Wear 232, 25-30．
　　42．Wu, J．M．*, Wu, N．Q．, Wang, G．X．and Li, Z．Z．(1997): In-situ observation of single-point wear of the PM alloy Al-10Ti．Transactions of Nonferrous Metals Society of China 7, 69-74．
　　43．Hu, S．B．, Li, Z．Z．, Mei, Z．and Wu, J．M．(2000): High temperature sliding wear behaviors of ion plating TiN composite coating with ion nitriding as interlayer on hot work die steel．Transactions of Nonferrous Metals Society of China 10, 777-782．
　　44．Zheng, S．L．, Wu, J．M．*, Zeng, Y．W．and Li, Z．Z．(1999): Ageing behavior of Cu-15Ni-8Sn alloy prepared by mechanical alloying．Transactions of Nonferrous Metals Society of China 9, 707-711．
　　45．Wu, N．Q．, Li, Z．Z．, Wu, J．M．and Wang, G．-X．(1998): Mechanosynthesis mechanism of TiC powder．Materials Science & Technology 14, 287-291．
　　46．Wu, N．Q．, Wu, J．M．, Lin, S．, Zhou, J．Q．and Li, Z．Z．(1998): Dry sliding wear of PM Al-10Ti alloy．Transactions of Nonferrous Metals Society of China 8, 421-429．
　　47．Wu, N．Q．, Su, L．Z．, Yuan, M．Y．, Wu, J．M．and Li, Z．Z．(1998): Nano-sized amorphous Cu-Zr alloy particles prepared by mechanochemical reaction,Materials Science and Engineering A 257, 357-360．
　　48．Wu, N．Q．, Su, L．Z．, Yuan, M．Y．, Liu, Y．Y．, Wu, J．M．and Z．Z．Li (1998): Preparation and microstructure of nano-sized Cu particles by mechanochemical reaction, Transactions of Nonferrous Metals Society of China 8, 610-612．
　　49．Wu, N．Q．, Wu, J．M．, Li, Z．Z．and Wang, G．-X．(1997): Formation of nanocrystalline f．c．c phase by mechanically driven crystallization．Materials Transactions JIM 38, 255-259．
　　50．Wu, N．Q．, Wu, J．M．, Wang, G．X．and Li, Z．Z．(1997): Amorphization in the Al-C system by mechanical alloying．Journal of Alloys and Compounds 260, 121-126．
　　51．Wu, N．Q．, Wang, G．X．, Wu, J．M．and Li, Z．Z．(1997): Formation of nanocrystalline TiC by ball milling of elemental titanium and carbon．International Journal of Refractory Metals & Hard Materials 15, 289-293．
　　52．Wu, N．Q．, Wu, J．M．, Li, W．, Wang, G．X．and Li, Z．Z．(1997): Preparation of Ti/Al based nanophase composite powder by mechanical alloying．Transactions of Nonferrous Metals Society of China 7, 1-4．
　　53．Wu, N．Q．, Wang, G．X．, Li, Z．Z．, Wu, J．M．and Chen, J．W．(1997): Microstructure and sliding wear behavior of PM alloy Al-10Ti after thermal exposure．Wear203-204, 155-161．
　　54．Wu, N．Q．, Wang, G．X．, Li, W．, Wu, J．M．and Li, Z．Z．(1997): Mechanically driven synthesis of nanophase TiC/Ti-Al composite powder, Materials Letters32, 259-262．
　　55．Wu, J．M．, Djerdj, I．, Graberg, T．and Smarsly, B．* (2012), “Mesoporous MgTa2O6 thin films with enhanced photocatalytic activity: on the interplay between crystallinity and mesostructure,” Beilstein Journal of Nanotechnology 3, 123-33．(open access from website: http://www．beilstein-journals．org/bjnano/home/home．htm)
　　56．Wen, W．, Wu, J．M．* (2012): A novel solution combustion synthesis of cobalt oxide nanoparticles as negative-electrode materials for lithium ion batteries, Journal of Alloys and Compounds 513, 592-96．
　　57．Wen, W．, Wu, J．M．* (2011): Eruption Combustion Synthesis of NiO/Ni Nanocomposites with Enhanced Properties for Dye-Absorption and Lithium Storage, ACS Applied Materials & Interfaces 3, 4112-19．
　　58．Wu, J．M．*, Song, X．M．, Yan, M．* (2011): Alkaline hydrothermal synthesis of homogeneous titania microspheres with urchin-like nanoarchitectures for dye effluent treatments, Journal of Hazardous Materials 194, 338-44．
　　59．Wu, J．M．*, Tang, M．L．(2011): One-pot synthesis of N-F-Cr-doped anatase TiO2 microspheres with nearly all-(001) surface for enhanced solar absorption, Nanoscale 3, 3915-3922．
　　60．Wu, J．M．*, Tang, M．L．(2011): Hydrothermal growth of nanometer- to micrometer-size anatase single crystals with exposed (001) facets and their ability to assist photodegradation of rhodamine B in water, Journal of Hazardous Materials 190, 566-73．
　　61．Wu, J．M．*, Song, X．M．, Ma, L．Y．, Wei, X．D．(2011): Hydrothermal growth of multi-facet anatase spheres, Journal of Crystal Growth 319, 57-63．
　　62．Wu, J．M．*, Wen W．(2010): Catalyzed degradation of Azo dyes under ambient conditions, Environmental Science & Technology 44, 9123-27．
　　63．Song, X．M．, Wu, J．M．*, Yan, M．(2009): Distinct visible-light response of composite films with CdS electrodeposited on TiO2 nanorod and nanotube arrays, Electrochemistry Communications 11, 2203-06．

　　国际会议
　　1．Wu, J．M．, Min WANG, Akiyoshi Osaka．(2007): Bioactive Composite Coating on Titanium Implants for Hard Tissue Repair, The 5th Asian-Australasian Conference on Composite Materials (ACCM-5), Hong Kong, China, November 27-30, Key Engineering Materials 334-335, 1249-52．
　　2．Wu, J．M．, Min WANG, Satoshi Hayakawa, Kanji Tsuru and Akiyoshi Osaka．(2006): In vitro bioactivity of hydrogen peroxide modified titanium: effects of surface morphology and film thickness, 18th International Symposium on Ceramics in Medicine, Kyoto, Jpn, December, 2005, Key Engineering Materials 309-311, 407-410．
　　3．Wu, J．M．, Min WANG, Satoshi Hayakawa, Kanji Tsuru and Akiyoshi Osaka．(2006): Direct deposition of a rutile layer on polymer substrates to induce bioactivity in vitro, 18th International Symposium on Ceramics in Medicine, Kyoto, Jpn, December, 2005, Key Engineering Materials 309-311, 419-422．
　　4．Wu, J．M．, Wang, M．, and Osaka, A．(2005): Biomimetic deposition of apatite on titania films prepared through various approaches, The 3rd International Symposium on Apatite and Correlative Biomaterials, Wuhan, China, October 25-28, 2005, p92．
　　5．Wu, J．M．, Wang, M．, and Osaka, A．(2005): Biomimetic apatite formation on titania films produced via a low-temperature Route, 2005 International Symposium on Quality of Bone and Scaffold Biomaterials, Hong Kong, China, October 17-18, 2005, p164．
　　6．Wu, J．M．, Satoshi, H．, Tsuru, K．and Osaka, A．(2003): Low temperature deposition of bioactive crystalline titania films: Effects of tantalum．15th International Symposium on Ceramics in Medicine, Sydney, Australia, December 4-8, 2002, Key Engineering Materials 240-242, 533-536．
　　7．Wu, J．M．, Satoshi, H．, Tsuru, K．and Osaka, A．(2002): Preparation of anatase and rutile layers on titanium substrates in aqueous solution and their tissue-bonding ability, The 104th Annual Meeting and Exposition on the American Ceramics Society, St．Louis, Missouri, Apr 22-May 1, 2002．
　　8．Wu, J．M．, Satoshi, H．, Tsuru, K．, Osaka, A．and Wang, X．X．(2001): In vitro evaluation on bone-bonding of chemically modified titanium, 14th International Symposium on Ceramics in Medicine, Hawaii, USA, December, 2001, Key Engineering Materials 218-220,141-144．
　　9．Wu, J．M．(2001): In vitro apatite deposition on chemically modified titanium．14th fall meeting of the ceramics society of Japan celebrating 21st century．Memorial Symposium on Ceramics by Young Asian Fellows, sponsored by Basic Science Division, Ceramic Society of Japan, Tokyo, Sep 26-28, 2001, p177．
　　
　　中文论文
　　1．周涛，刘少光，唐名早，陈成武，徐玉松，吴进明*，选择性催化还原脱硝催化剂研究进展，硅酸盐学报，37（2），（2009）317-324．
　　2．张高洁，吴进明*，黄兵，刘少光，严密，纳米TiO2薄膜的自然时效，浙江大学学报（工学版），42（7），（2008）1266-70．
　　3．刘少光，吴进明*，张升才，胡小海，荣淑杰，李志章，氮气保护对纳米复合涂层组织与性能的影响，浙江大学学报（工学版），42（3），（2008）494-97．
　　4．刘少光，赵琪，李志章，郦剑，张升才，吴进明，胡小海，N2保护对TiAl3和Cr3C2复合涂层组织结构及高温冲蚀性能的影响，功能材料，39（1），（2008），166-169．
　　5．周涛，刘少光，吴进明，陈成武，徐玉松，火电厂氮氧化物排放控制技术，环境工程，26（6），（2008），82-85．
　　6．张高洁，吴进明*，刘少光，严密，纳米复合结构二氧化钛薄膜的制备及其光催化降解水中若丹明B的能力，硅酸盐学报，35（4），（2007）442-46．
　　7．应华根，吴进明，罗伟，严密，无热处理高硬度高耐磨性化学镀镍磷合金，浙江大学学报（工学版），41（8），（2007）1356-1360．
　　8．吴磊，严密，应华根，吴进明，罗伟，NdFeB磁体表面化学镀Ni-P合金防腐研究，稀有金属材料与工程，36（8），（2007）1398-1402．
　　9．夏华，严密，王晨，吴进明，罗伟，Nd与Co对Nd2Fe14B/α-Fe磁体温度稳定性影响，浙江大学学报（工学版），41（3），（2007）529-532．
　　10．吴磊，应华根，吴进明，罗伟，严密，NdFeB磁体表面化学镀Ni-Co-P合金及其耐腐蚀性能研究，材料工程，(z1），（2006）202-206．
　　11．刘少光，吴进明*，张升才，荣淑杰，胡小海，李志章，退火处理对含纳米陶瓷粉电弧喷涂层组织结构与高温冲蚀性能的影响，功能材料，37（12），（2006），2023-26．12．刘少光，吴进明*，张升才，荣淑杰，胡小海，李志章，超临界锅炉管道耐磨涂层的微观组织结构及冲蚀规律，动力工程，26（6），（2006），908-12．
　　13．张升才，吴进明*，尾坂明義，钛金属低温生物活化，材料科学与工程学报， 23(1)，2005， 71-74．
　　14．吴进明*，都留寛治，早川 聡，尾坂明義，钛金属表面生物陶瓷涂层研究的现状，硅酸盐学报，31（7），（2003）692-697．
　　15．吴进明*，李志章，20钢锅炉钢管的断裂及腐蚀穿孔失效，金属热处理，（5），（2000）29．
　　16．吴进明*，李志章，叶仲屏，快速凝固Al-Ti合金的再结晶，材料科学与工程，18（1），（2000）36．
　　17．吴进明*，郑史烈，李志章，曾跃武，冷变形对低滑动速率下Al-10Ti合金磨损的影响，摩擦学学报，19（4），（1999）342-347．
　　18．吴进明*，郑史烈，李志章，曾跃武，第二相颗粒对快速凝固Al-Ti合金滑动磨损性能的影响，摩擦学学报，18（4），（1998）289-294．
　　19．吴进明*，郑史烈，李志章，颗粒增强铝基原位复合材料，材料导报，13（5），（1999）52-54．
　　20．吴进明*，郑史烈，李志章，吴年强，CuO-Al系的机械驱动还原反应，中国有色金属学报，8（suppl．2），（1998）11．
　　21．吴进明*，李志章，叶仲屏，球磨时间对Al-8Ti合金组织的影响，材料科学与工程，16（2），（1998）72．
　　22．吴进明*，吴年强，李志章，曾跃武，Al-12．5Ti混合粉的机械合金化，浙江大学学报（自然科学版），31(5), (1997), 614-621．
　　23．吴进明*，张升才，李志章，吴年强，陈丰土，气门锁夹槽的断裂失效分析，金属热处理，（4），（1997）34-36．
　　24．吴进明*，吴年强，曾跃武，李志章，黄海东，机械合金化Al-8Ti合金粉的烧结成型研究，金属热处理，（12），（1997）3．
　　25．郑史烈，吴进明*，吴年强，曾跃武，李志章，机械合金化Cu-15Ni-8Sn合金的制备，功能材料，增刊，(1998) 849．
　　26．吴年强，吴进明，李志章，王广欣，曾跃武，机械合金化制备纳米晶过饱和固溶体Al(Ti,C),中国有色金属学报，增刊2，（1996）293．
　　27．吴年强，林硕，叶仲屏，吴进明，李志章，机械合金化中的固态反应，材料导报，13（6），（1999）52-54．
　　28．曾跃武，郑史烈，陈津文，吴进明，李志章，Cu-15Ni-8Sn合金的机械合金化，中国有色金属学报，9（suppl．1）（1999）16．

　　“如果发现导师信息存在错误或者偏差，欢迎随时与我们联系，以便进行更新完善。”

添加浙江大学学姐微信，或微信搜索公众号“考研派小站”，关注[考研派小站]微信公众号，在考研派小站微信号输入[浙江大学考研分数线、浙江大学报录比、浙江大学考研群、浙江大学学姐微信、浙江大学考研真题、浙江大学专业目录、浙江大学排名、浙江大学保研、浙江大学公众号、浙江大学研究生招生）]即可在手机上查看相对应浙江大学考研信息或资源。

浙江大学